Platythyrea bidentata
| Notice: | This page is derived from the original publication listed below, whose author(s) should always be credited. Further contributors may edit and improve the content of this page and, consequently, need to be credited as well (see page history). Any assessment of factual correctness requires a careful review of the original article as well as of subsequent contributions.
If you are uncertain whether your planned contribution is correct or not, we suggest that you use the associated discussion page instead of editing the page directly. This page should be cited as follows (rationale):
Citation formats to copy and paste
BibTeX: @article{Brown1975Search:Agriculture;CornellUniversityAgriculturalExperimentStation15, RIS/ Endnote: TY - JOUR Wikipedia/ Citizendium: <ref name="Brown1975Search: Agriculture; Cornell University Agricultural Experiment Station15">{{Citation See also the citation download page at the journal. |
Ordo: Hymenoptera
Familia: Formicidae
Genus: Platythyrea
Name
Platythyrea bidentata Brown, W. L., 1975 – Wikispecies link – Pensoft Profile
- Platythyrea bidentata Brown, W. L., 1975, Search: Agriculture; Cornell University Agricultural Experiment Station 15: 51-51.
Description
(Figs. 26, 28)
Materials Examined
Holotype worker: TL 8.7, HL 1.77 (including clypeus), HW 1.33 (just behind eyes) (CI 75), ML 0.31, scape L 1.64, greatest scape W 0.26, greatest diameter of eye 0.30, WL 2.84, petiolar node L 1.10, W 0.57 mm.
Description
Head with convex sides and transverse posterior border, very slightly concave, and the cervical margin of the head showing in full-face view. Frontal lobes convex, separated by a shallow, round-bottomed median sulcus that ends posteriad where the lobes pass into the short, round-edged, parallel frontal carinae. Clypeus swollen and strongly convex in the middle in both directions, its free border with a narrow, rounded lamellar apron, broadest toward the middle. Posterior clypeal border fine but reasonably distinct. Mandibles robustly subtriangular, with very slightly convex outer borders and distinct teeth — a larger apical tooth, followed by alternating larger and smaller teeth, but all generally diminishing in size basad; 9 teeth visible, but there are probably one or two small teeth hidden beneath the clypeal margin. A short but distinct groove runs directly anteriad from each mandibular insertion on the dorsal surface near the outer margin, and ends before reaching the outer margin. Eyes only feebly convex, suboval, situated exactly at mid-HL, covered with a pile of minute, erect hairs. Antennal scapes long and robust, thickest beyond midlength; in full-face view when held nearly straight back, surpassing posterior border by about twice their apical thickness. Basal funicular segment equal in L (0.35 mm) to III; segment II much the longest (L 0.50 mm), apical segment L 0.37 mm, weakly curved, with a flattened, narrowly rounded apex. Pronotum as seen from above subcircular in its anterior 2 / 3, without margins or humeral angles, separated from mesonotum by the usual distinct and flexible suture. Remainder of trunk with nearly parallel sides (slightly constricted in mesonotal region) 2 / 3 to 3 / 4 as wide as pronotum. Sutures between mesoscutum, mesoscutellum, and metanotum are nearly effaced but can be made out partly in certain lights as obscurely impressed marks. In side view, the dorsal outline is nearly straight from promesonotal suture to beginning of curve leading into propodeal declivity, except for a slight dip centered in the metanotal region. Declivity convex in side view due to low, bluntly rounded lateral margins; face of declivity subtriangular, concave from side to side, narrowed at the top and extending a short way onto the dorsal surface; indistinctly transversely ruguloso-striate in the middle and lower parts. Propodeal suture distinct through most of its course, especially below the spiracles, which have slit-shaped orifices, about 4 X longer than broad. Petiolar node as in figs. 26 and 28, upper sides very shallowly impressed (concave) behind midlength, just in front of the bases of the posterodorsal teeth or lobes. Tergum of postpetiolar (first gastric) segment broader than long, rounded strongly in both directions in front, the rounded part overhanging the insertion. Sternum of postpetiolar segment also rounded in front, without process or ridge. Second gastric segment slightly longer, but slightly narrower, than first, but still a little broader than long. Pygidium narrowly rounded. Legs long and robust; front coxae and femora especially well developed, the femur incrassate in the middle (maximum W about 0.3 x L); hind femur L 1.90, hind tibia L 1.56 mm. Tibial spurs 2 on each middle and hind leg, the lateral spur a little more than half as long as the inner one, all pectinate. Teeth of tarsal claw reduced and difficult to see, especially on first pair of legs. Sculpture and pilosity of the usual PlatythyreaHNS kind; normally exposed surfaces of body, mandibles, and appendages very finely, densely, and shallowly punctulate and pruinose, with fine, short standing hairs on anterior clypeal margin, mandibles, and gastric apex. The surface is in general opaque, but a dull shine can be obtained in certain lights, especially from petiolar node and anterior sides of gaster. The larger punctures or foveolae normally found in PlatythyreaHNS are small and subdued in P. bidentataHNS, but can be seen in the right light on the head, particularly mesad of the eyes, on the sides of the pronotum, and less distinctly elsewhere. Color very dark brown, appendages castaneous, shading into reddish yellow at the antennal apex. Paratype worker: TL 8.4, HL 1.70, HW 1.23 (CI 72), ML 0.27, scape L 1.55, greatest scape W 0.25, greatest diameter of eye 0.26, WL 2.73, petiolar node L 0.91, W 0.53 mm. Besides its smaller size and slightly smaller eyes, the paratype has a more distinctly impressed area in the region of the suture between meso- and metanotum, and the metanotum itself is slightly raised behind this. The paratype also has some coarse but only moderately distinct, prevailingly longitudinal rugae on the posterior half of the middle sides of the petiolar node. The holotype and the lone paratype both from the Cuernos Mountains, near Dumaguete, Negros Oriental, Philippines (J. W. Chapman), taken at an elevation of about 3600 feet. On the holotype locality label, " 1942 " is written on the underside in pencil, while on the underside of the paratype label is the pencilled date, " 1 / 10 / 43. " Holotype and paratype in MCZ.
Discussion
P. bidentataHNS is most closely related to P. clypeataHNS, but the new species has a much more deeply excavated posterodorsal petiole border, forming 2 blunt posterior teeth much like those of P. quadridentaHNS. The color of bidentataHNS is also much darker than in the two known clypeataHNS (including thwaitesiHNS) specimens, both of which are isolated winged queens, and hence unlikely to be callow. P. quadridentaHNS and P. sageiHNS have blunt but distinct propodeal teeth, lacking in bidentataHNS.
Taxon Treatment
- Brown, W. L.; 1975: Contributions toward a reclassification of the Formicidae. V. Ponerinae, tribes Platythyreini, Cerapachyini, Cylindromyrmecini, Acanthostichini, and Aenictogitini., Search: Agriculture; Cornell University Agricultural Experiment Station 15: 51-51. doi
This treatment was originally uploaded by Plazi, compare this treatment on Plazi. Unless this treatment has been substantially changed on Species-ID, Plazi requests to maintain a link back to the original repository.
