Larimichthys terengganui
| Notice: | This page is derived from the original publication listed below, whose author(s) should always be credited. Further contributors may edit and improve the content of this page and, consequently, need to be credited as well (see page history). Any assessment of factual correctness requires a careful review of the original article as well as of subsequent contributions.
If you are uncertain whether your planned contribution is correct or not, we suggest that you use the associated discussion page instead of editing the page directly. This page should be cited as follows (rationale):
Citation formats to copy and paste
BibTeX: @article{Seah2015Zootaxa3956, RIS/ Endnote: TY - JOUR Wikipedia/ Citizendium: <ref name="Seah2015Zootaxa3956">{{Citation |
Ordo: Perciformes
Familia: Sciaenidae
Genus: Larimichthys
Name
Larimichthys terengganui Seah, Ying Giat, 2015 – Wikispecies link – Pensoft Profile
- Larimichthys terengganui Seah, Ying Giat, 2015, Zootaxa 3956: 272-279.
Materials Examined
Holotype. NMMB-P 21523, 1 (161mm SL), fish landing port at Pulau Kambing, Kuala Terengganu, Malaysia, collected by Norhafiz Hanafi in March 2014. Paratypes. KAUM-I. 16977, 1 (200 mm SL), Kuala Terengganu, identified as Larimichthys crocea (photo on p. 140 in Matsunuma et al., (2011). NMMB-P 21723, 1 (166 mm SL), collected with holotype NMMB-P 21523, fish landing port at Pulau Kambing, Kuala Terengganu, Malaysia, collected by Norhafiz Hanafi in March 2014, (gas bladder and right side otolith extracted for illustration). NMMB-P 21542, 2 (151 & 155 mm SL), fish landing port at Pulau Kambing, Kuala Terengganu, Malaysia, collected by Norhafiz Hanafi, March 2014. NMMB-P 21524, 1 (161 mm SL), one of three from UMTF 0 5798, off Terengganu (Matsunuma et al.2011). UMTF 0 5949, 0 5950, 2 (171 & 178 mm SL), two of three from UMTF 0 5798, off Terengganu (Matsunuma et al., 2011). UMTF 05951- 0 5956, 6 (153–173 mm SL), fish landing port at Pulau Kambing, Kuala Terengganu, Malaysia, collected by Norhafiz Hanafi, March 2014.
Diagnosis
Diagnosis. A species of Larimichthys with an equally short pair of ventral and dorsal limbs at the lateral ends of gas bladder appendage; gill raker length about ½ the eye diameter, shorter than gill filament at the angle of first gill arch; snout length greater than eye diameter; 2 nd anal spine equal or slightly shorter than eye diameter; outer gill rakers of first arch 22–25. Inner gill rakers of first arch 17–19. Vertebrae 11 + 13 = 24. Second dorsal fin soft rays 29–32.
Description
Description. Counts and measurements of the type specimens are shown in Table 1. The following data are provided for the holotype, followed by the size range and mean for the 13paratypes.
Holotype Paratypes (n = 13)......continued on the next page Holotype Paratypes (n = 13) Dorsal fin with IX spines on the anterior (spinous) portion and I spine and 29–32 soft rays on the posterior portion. Anal fin with II spines and 8 or 9 soft rays. Pectoral fin with 16–17 soft rays. Outer gill rakers of 1 st arch 7– 9 + 15–17 = 22–25. Inner gill rakers of 1 st arch 5–6 + 12–14 = 17–19. Preopercular margin weakly indented no sharp spines. Lateral line pore scales 49–54. Circumpeduncular scales 18–20. Vertebrae 11 + 13 = 24. NMMB-P 21523Min Max Mean SD Standard Length (mm)161.0 151.1 197.8 165.8Counts1st dorsal fin spine9 9 9 9.0 0.0 2nd dorsal fin spine1 1 1 1.0 0.0 2nd dorsal fin soft rays32 29 32 30.9 1.0Anal fin spine2 2 2 2.0 0.0Anal fin soft rays9 8 9 8.6 0.5Pectoral fin rays16 16 17 16.1 0.3Outer gill rakers of 1st arch23 22 25 23.6 1.2upper limb7 7 9 7.5 0.7lower limb16 15 17 16.1 0.7Inner gill rakers of 1st arch18 17 19 18.4 0.6upper limb6 5 6 5.4 0.5lower limb12 12 14 12.9 0.6Lateral line pore scales51 49 54 51.8 1.3Scale rows in longitudinal series58 56 62 57.6 1.9Scales above lateral line7 7 8 7.5 0.5Scales below lateral line8 7 9 8.1 0.5Circumpeduncular scales18 18 20 18.7 0.7Vertebrae24 24 24 24.0 0.0precaudal11 11 11 11.0 0.0caudal13 13 13 13.0 0.0Measurements Snout to anal fin origin72.0 69.1 72.7 71.2 1.1Snout to 2nd dorsal fin origin51.5 47.6 51.6 50.4 1.0Snout to 1st dorsal fin origin32.5 32.0 34.2 33.0 0.7Snout to pectoral fin insertion31.2 30.5 32.2 31.3 0.5Snout to pelvic fin insertion35.3 33.0 35.9 34.2 1.0Head length32.8 30.6 34.2 32.5 0.8Snout length8.0 7.0 8.0 7.6 0.3Maxilary length16.9 15.1 17.7 16.6 0.7Eye diameter6.7 5.4 7.4 6.5 0.6Interorbital width9.4 7.9 9.5 8.9 0.4Pectoral fin length28.6 23.3 29.2 26.4 1.7Pelvic fin length21.1 18.0 21.3 19.5 1.1Body depth (D1-P2)28.9 27.6 30.2 29.3 0.7Body width (P1-P1)15.7 13.2 16.5 15.2 0.8
NMMB-P 21523Min Max Mean SD1st dorsal fin base length17.6 17.1 19.3 18.1 0.7longest spine length12.7 9.8 13.4 11.7 1.2 2nd dorsal fin base length43.8 42.1 45.9 43.7 1.2longest ray length12.3 9.5 12.3 11.0 0.8Anal fin base length9.1 7.7 10.6 9.5 0.8 2nd spine length6.6 5.1 7.1 6.3 0.7 1st ray length16.8 12.1 16.8 14.8 1.5Caudal peduncle depth8.4 7.5 8.8 8.3 0.4Pelvic fin tip to vent12.0 11.4 16.7 13.7 1.5Vent to anal fin origin4.8 3.7 4.9 4.2 0.4Longest gill raker on 1st arch3.4 3.2 3.8 3.5 0.2Longest gill filament on 1st arch3.7 3.5 4.7 4.1 0.4
Gas bladder with 26 pairs of lateral appendages, including a couple of long branched appendages extended to the base of anal fin (Fig. 2). A pair of equally short ventral limbs at the lateral ends of gas bladder appendage, which are not extend lateral-ventrally to lower half of the body wall (Fig. 3). Sagitta (Fig. 4) kidney-shaped with a shallow tadpole-shaped sulcus mark on its inner surface, ostium (head) rounded, a shallowly grooved, cauda, and a conspicuous marginal groove dorsally; outer surface more elevated at posterior half. Body fusiform, elongated with a moderately large head, about 3 times in standard length (SL). Head cavernous but moderately firm. Snout 4.1–4.6 in head length, its tip with three upper and five marginal pores; rostral fold slightly indented below the marginal pores. Eye moderately large, oval shaped, horizontal diameter 4.4–5.9 in head length. Interorbital region broad, 3.3 –4.0 in head length. Preopercular margin weakly indented without sharp spines or serration.
Mouth large oblique, terminal, maxillary 1.8–2.1 in head length, the lower jaw slightly projecting, the mouth gape forming an angle of about 45 degrees. Tip of upper lip on horizontal passing near ventral margin of orbit. End of maxillary on vertical line passes near posterior margin of eye. Underside of lower jaw with 6 pores, the median pair set on tip of lower jaw. Teeth narrow set in ridges, upper jaw with an outer row of clearly enlarged, conical teeth bordered medially by a narrow row of smaller teeth. Lower jaw with a row of enlarged sharp teeth, several larger teeth clustered at the tip of lower jaw. Gill rakers, moderately long and slender, the longest one at the angle about ½ the eye diameter, shorter than gill filament at the angle of arch. Anal fin truncate, the second spine short and fairly stout, 4.5–6.1 in head length. Caudal fin rhomboidal, about ⅔ of head length. Tip of pectoral fin vertically passed beyond the tip of pelvic fin but short of vent. Pelvic tip not filamentous, its distance to vent is greater than that of vent to anal fin origin. Scales moderately large, thin and ctenoid on posterior half of body behind the tip of pectoral fin tip, ctenii on scales becoming reduced anteriorly, below first portion of dorsal fin and between pectoral and pelvic fins. Transverse scale between dorsal fin origin and lateral line 6–7. Dorsolateral scales above lateral line ctenoid. Head squamation completely cycloid, scales becoming reduced and embedded on the snout and suborbital region. Soft dorsal and anal covered with small cycloid scales from base to distal margin. Pectoral, pelvic and caudal fins, with small cycloid scales at bases, naked distally. Lateral line pored scales smooth anteriorly, but with a small field of ctenii posteriorly. Pored lateral line scales usually with a single dorsal and ventral branch, occasionally more arborescent. Photophore perforated scales are also found on the belly, which are more prominent above anal fin base and extended to lower portion of caudal peduncle. Color in alcohol. Ground color brownish darker dorsally and fading to whitish pale ventrally. Snout, top of head, nape, dorsum and sides above level of pectoral fin base profusely dusted with very small brown chromatophores, becoming larger and more widely dispersed ventrally, and disappearing from ventral body surface. Tip of snout with a darkish blotch, upper lip with a dark margin dorsally, lower lip with a dark margin, roof of mouth pale, becoming dusky posteriorly to dark lining in upper part of inner opercula chamber, appearing as a dark triangle externally. Eye with dark upper and lower margin, suborbital pale with scattered silvery tint. Spinous dorsal with dark tip, distal margin of soft dorsal dusky; pectoral fin axil with a black blotch. Pelvic and anal fin pale to yellowish. Caudal lightly and evenly dusted. Belly with photophores along scale rows, 4–5 prominent rows above anal base to lower part of caudal peduncle. Peritoneum variably sprinkled with large, stellate, chromatophores, especially in anterior portion of the body cavity.
Distribution
Distribution. All know specimens of the species were collected from South China Sea around Kuala Terengganu, east coast of Peninsular Malaysia. The species may be endemic to the area.
Etymology
Etymology. Named after the locality of the new species, Terengganu, east coast of Peninsular Malaysia. Comparisons. Larimichthys terengganui can be distinguished from other species of the genus by having gas bladder appendages at ventral limb with a pair of equally short branches; both branches are elongate in L. crocea and only one is elongated anteriorly in L. polyactis. Although L. pamoides (specimens not examined) has a pair of short limbs (Trewavas, 1977, Fig. 60), but other characters are distinct from L. terengganui (Trewavas, 1977, p. 542), and as reported from northwestern Australia and southern New Guinea, appears to have a distribution separate from that of Larimichthys terengganui. Furthermore, L. pamoides is entirely covered in cycloid scales, unlike the other species which are mostly covered with ctenoid scales, with cycloid scales only on head and below pectoral fins. The new species has the least number of vertebrae (24), compared to the other species, 25 in L. crocea and L. pamoides, and 28 in L. polyactis. Larimichthys terengganui has fewer dorsal soft rays (29–32 vs. 31–36 in other Larimichthys). Furthermore, the second anal spine in L. terengganui is equal or slightly shorter than eye diameter, but shorter in L. polyactis, longer in L. pamoides and equal or slightly longer in L. crocea. Larimichthys terengganui can be distinguished from L. crocea and L. polyactis by having a gill raker shorter than gill filament at the angle of first gill arch, and a relatively elongated anterior part of fish (head length 30.6–34.2 % SL; snout to pectoral fin insertion 30.5– 32.2 % SL; snout to pelvic fin insertion 33.0– 35.9 % SL). External morphology of L. terengganui is most similar to that of L. crocea, with a snout length greater than eye diameter, whereas in L. crocea the snout is shorter than eye diameter. Larimichthys terengganui has fewer gill rakers on the first arch than Larimichthys crocea (22–25 vs. 26– 28), and has fewer scales above lateral line than Larimichthys crocea (7–8 vs. 8–10). Diagnostic characters of the four species of Larimichthys are presented in Table 2.
L. terengganui L. crocea L. polyactis L. pamoides *SL (mm)151–198 122–380 105–285 88Number14 8 12 1Counts2nd dorsal fin soft rays29–32 31–35 32–36 36Anal fin soft rays8–9 8 8–10 7Outer gill rakers of 1st arch22–25 26–28 25–31 26lower limb15–17 18–20 16–21 18Inner gill rakers of 1st arch17–19 20–22 19–22-lower limb12–14 14–16 13–16-Lateral line pore scales49–54 49–56 54–59-Scale rows in longitudinal series56–62 70–72 64–65-Scales above lateral line7–8 8–10 5–8-Circumpeduncular scales18–20 20–24 20–21-Vertebrae24 25 28 25precaudal11 11 12–13 10caudal13 14 15–16 15Measurements as % of SL Snout to 2nd dorsal fin origin47.6–51.6 42.1–43.5 45.2–50.9-Snout to 1st dorsal fin origin32.0–34.2 28.1–28.6 30.7–36.8-Snout to pectoral fin insertion30.5–32.2 26.8–27.4 27.1–30.2-Snout to pelvic fin insertion33.0–35.9 30.2–32.8 31.0–31.8-Head length30.6–34.2 27.1–30.0 25.1–29.8 31.6Snout length7.0–8.0 5.6–6.7 5.3–7.3 8.9Eye diameter5.4–7.4 5.2–8.3 5.9–7.5 8.3Interorbital width7.9–9.5 7.6–9.1 7.3–8.9 10.6Pectoral fin length23.3–29.2 19.6–23.0 21.4–26.6 25.4Body depth (D1–P2)27.6–30.2 24.7–28.5 23.3–28.7 30.8 2nd dorsal fin base length42.1–45.9 46.0–49.6 41.1–45.5-2nd anal spine length5.1–7.1 4.8–8.4 4.3–6.7 10.7Caudal peduncle depth7.5–8.8 6.8–7.7 7.1–9.0-Longest gill raker on 1st arch3.2–3.8 3.4–4.5 3.0–4.1-Longest gill filament on 1st arch3.5–4.7 2.4–4.0 2.4–3.7- * Data from Trewavas (1977), for holotype of species.
Discussion
Remarks. The species was first reported in Matsunuma et al. (2011: 140) as a new record of Larimichthys crocea in east coast of Peninsular Malaysia. Three specimens were kept at the UMT fish collection. In March 2014, Mr Norhafiz Hanafi collected additional specimens and which were subsequently identified as a new species described herein.
Taxon Treatment
- Seah, Ying Giat; Hanafi, Norhafiz; Mazlan, Abd Ghaffar; Chao, Ning Labbish; 2015: A new species of Larimichthys from Terengganu, east coast of Peninsular Malaysia (Perciformes: Sciaenidae), Zootaxa 3956: 272-279. doi
This treatment was originally uploaded by Plazi, compare this treatment on Plazi. Unless this treatment has been substantially changed on Species-ID, Plazi requests to maintain a link back to the original repository.
